Electro Heating Limited · NICEIC, Gas Safe and MCS registered · Enfield, Barnet, Haringey and across London
07976 704160Mon to Fri 9am to 7pm

Air conditioning in
Barnet

Installation, servicing and repair across Finchley, Whetstone, Totteridge, Mill Hill, Hendon, Golders Green, Hampstead Garden Suburb, New Barnet and High Barnet. Fifteen to thirty minutes from our base in Southgate, depending on which end of the borough.

  • Single room fitted from 1,900 to 3,500 pounds
  • Free survey, usually within 48 hours
  • Permission position checked for your address before we quote
  • Fixed written price, one day on site for most single rooms

Covering EN4, EN5, N2, N3, N11, N12, N20, NW4, NW7, NW11.

  • Electro Heating LimitedCompany 12609754, registered in England and Wales
  • NICEIC and Gas Safe registeredHeld by the parent company
  • MCS certifiedFor heat pump and solar work
  • 10+ years in LondonSame engineers, same company

Air conditioning installation in Barnet costs 1,900 to 3,500 pounds for a single room, fitted and including VAT, and takes one day on site.

Hampstead Garden Suburb is one of the most tightly controlled areas in London for external alterations. If your address is inside it, that is the first thing to establish rather than the last.

The housing stock in Barnet, and what it means for the job

Barnet is really two boroughs for our purposes. North of the North Circular you get interwar semis and detached houses in Whetstone, Totteridge and Mill Hill, with side access and space, and those are straightforward jobs. South and west you get Hampstead Garden Suburb and the conservation areas around Golders Green and Hendon, where the appearance of the building is a live issue and the outdoor unit position needs real thought. Finchley adds a large stock of purpose-built 1930s flats, and those are the jobs where the freeholder question comes before everything else.

The typical Barnet installation

A common Barnet job is a two-unit multi-split serving a main bedroom and a loft conversion in a Finchley or Whetstone semi, with one outdoor unit on the rear elevation. Two days on site.

What it costs here

Installed prices, Barnet
JobSystemInstalled price
One bedroom2.5kW single split£1,750 to £2,400
One double bedroom3.5kW single split£1,900 to £2,800
One living room5kW single split£2,300 to £3,600
Two rooms2 unit multi-split£3,200 to £5,500
Three rooms3 unit multi-split£4,500 to £7,500
Annual serviceAny make£95 plus VAT
Fault diagnosisAny make£89 plus VAT, waived if we repair

Every figure on this site is an estimate based on published UK market ranges and our own installation experience. It is not a quotation. The price you are given after the free survey is the price you pay.

Permission in Barnet

Parts of Barnet are inside conservation areas and parts are not, so the answer genuinely depends on the street rather than on the borough. Outside a conservation area, a house installation that meets the Class G conditions needs no application at all. Inside one, the unit cannot face a highway.

We check the conservation area boundary, any Article 4 direction and the listed building register for your exact address before quoting, and we tell you in writing what we find. We do not publish this council's individual position on this page, because we will not state a council's position we have not read. What we will do is confirm it for your property before you spend anything.

Everything else we do in Barnet

Air conditioning in Barnet: common questions

How much does air conditioning cost in Barnet?

1,900 to 3,500 pounds for a single room in Barnet. Loft conversions, which are common here, usually need a 3.5kW rather than a 2.5kW unit. A two-room system on one outdoor unit is typically 3,200 to 5,500 pounds, and three rooms 4,500 to 7,500 pounds.

Every price includes the units, installation, commissioning, electrical work and VAT. The fixed price comes after a free survey. There is a full breakdown on the cost page.

Do I need planning permission for air conditioning in Barnet?

In most of Barnet a domestic installation on a house is permitted development and needs no application, provided it meets all the Class G conditions. Parts of the borough are inside conservation areas, where the unit cannot face a highway. Flats need planning permission regardless.

We check the conservation area boundary, any Article 4 direction and the listed building register for your specific address before we quote. The full set of conditions is on the planning permission page.

How quickly can you get to Barnet?

Fifteen to thirty minutes from our base in Southgate, depending on which end of the borough. For a survey we usually offer something within 48 hours, and for a fault call we will tell you the day we can genuinely attend rather than promising one we cannot keep.

Do you install in flats in Barnet?

Yes, and a large part of our work is flats. It takes two permissions rather than one: the freeholder's written consent and planning permission from the council. We prepare the licence pack the managing agent will ask for at no charge, including the drawing, the sound data and the insurance.

The order matters, and doing it in the wrong order is what makes flat installations expensive. There is a full sequence on the leasehold flats page.

Do you service and repair existing systems in Barnet?

Yes, any make and any age, including systems installed by companies no longer trading. An annual service is 95 pounds plus VAT and a fault diagnosis is 89 pounds plus VAT, waived if we do the repair the same day. See servicing and repairs.

Free survey anywhere in Barnet

Fifteen to thirty minutes from our base in Southgate, depending on which end of the borough. Tell us the postcode and the rooms, and we will give you a written fixed price and an honest answer on permission.

Call now WhatsApp